Harvey Hv3 Water Softener Installation Manual (2026 Release)

If you want to bypass the water softener during installation, attach the bypass valve to the inlet and outlet pipes. This will allow you to direct water around the softener while you work on it.

The drain line is used to discharge wastewater during the regeneration process. Connect the drain line to the drain valve on the Harvey HV3 water softener unit. Make sure the drain line is securely attached and positioned to prevent kinking or blockages.

Follow the manufacturer’s instructions to program the Harvey HV3 water softener. This may include setting the hardness level, regeneration frequency, and other parameters. harvey hv3 water softener installation manual

Locate the main water shut-off valve and turn it clockwise to shut off the water supply to your home. Open a nearby faucet to drain the water from the pipes.

Turn on the water supply and check for leaks at all connections. Run a water test to ensure the softener is functioning correctly. If you want to bypass the water softener

Connect the inlet pipe to the inlet valve on the Harvey HV3 water softener unit. Make sure the pipe is securely attached using the provided fittings and Teflon tape or pipe dope.

The brine tank is used to hold the salt used for regeneration. Connect the brine tank to the Harvey HV3 water softener unit using the provided tubing and fittings. Connect the drain line to the drain valve

Harvey HV3 Water Softener Installation Manual: A Comprehensive Guide**